Norton 350cc Manx Replica
Frame no. RER-1
Engine no. 305
When production resumed post-war, Norton's over-the-counter Manx racer emerged much as it had been in 1939, with single-overhead-camshaft engine, 'square' cylinder head finning, upright gearbox, and plunger-suspended 'garden gate' frame. Only the presence of the Roadholder telescopic front fork readily distinguished the new Manx from its immediate predecessor. 1949 brought the first significant change in engine specification, the Manx gaining a double-overhead-camshaft cylinder head like that enjoyed by the works bikes for many years, but the major development was the arrival of the Featherbed frame for 1951. Works rider Geoff Duke had debuted the Featherbed at Blandford in April 1950, crushing the opposition and setting a new lap record, and the McCandless-designed chassis would enable Norton to remain competitive with the more powerful multi-cylinder opposition for the next few seasons.
As far as its cycle parts were concerned, the last Featherbed-framed Manx of 1962 was recognisably the same machine as that which debuted in production form in 1951. There were, of course, differences but these were minor when compared with the changes made to the engine. The latter's major revision occurred in 1954 when both 350 and 500 models adopted near 'square' bore/stroke dimensions. The result was significantly increased power but from then on the gains would be smaller, and much subsequent development was aimed at improving reliability. Today the popularity of the Manx in classic racing remains undiminished, with original examples racing alongside replicas of differing specification produced by specialist manufacturers worldwide.
The superb Manx replica offered here is mostly to factory specification while incorporating some significant upgrades, not the least of which is an ultra-short-stroke engine. Combining a 55mm stroke (down from the stock 76.7mm) with a 90mm bore, this unit has revved as high as 11,200rpm (at Chimay in Belgium) with up to 10,500 revs observed as a reasonable limit. Raced both by the owner and sponsored riders, the Manx has enjoyed considerable success at IHRO meetings in Continental Europe against the series' typically strong opposition, finishing 2nd or 3rd on numerous occasions. Noteworthy features include a single-piece crankshaft with Cosworth shell bearings; P E slipper piston; Arrow titanium con-rod; Exceldyne titanium inlet and exhaust valves; Lucas 2MTT twin-spark magneto; Fontana front brake; Manx rear brake and a Quaife six-speed cartridge-type gearbox. We are advised that the engine has just been rebuilt and is ready to race. Some 60lb (27kg) lighter than standard, this extremely well specified 350 Manx is a potential race winner in the right hands.
- There is no Frame or Engine number visible. This machine was fitted with a black fairing at time of photography. It is now fitted and sold with a green fairing.